manualshive.com logo in svg
background image

Installation and Commissioning

Instructions

MS2021PHBF / MS2021PHBSM

Hi-Bay Multi-Function Dual Output LightSpot 

with photocell

MS2021PHBSM

 
MS2021PHBF

Note: HP2000  required for commissioning

User override available via the HC7 and HC8 (dedicated) 

and HC5 (general purpose)

Hand-held Infrared Controllers

Содержание Ex-Or MS2021PHBF

Страница 1: ...021PHBF MS2021PHBSM Hi Bay Multi Function Dual Output LightSpot with photocell MS2021PHBSM MS2021PHBF Note HP2000 required for commissioning User override available via the HC7 and HC8 dedicated and HC5 general purpose Hand held Infrared Controllers ...

Страница 2: ...programmable run on timer The HC7 is a dedicated hand held Infrared controller for this mode but the HC5 will also switch the two outputs as outlined in 1 above 4 Lighting Control Emergency Test Controller This operating mode allows the testing of an area of Emergency Lighting to be conveniently implemented without the expense of a special single function controller The Switched Live output remain...

Страница 3: ... lights never turn off for lack of detected movement R2 Off Delay In Lighting mode this defines the period from last detected occupancy to secondary Lights Off In other modes setting this to longer than R1 Off Delay allows for an extended filling time for flush cistern or for extractor fan or air conditioning run on In Emergency Test mode it is not used so that its configured value is a don t care...

Страница 4: ...tor must have already been programmed to Passive Mode 2 Wait until the time of day when the natural light level is at the point below which you would want the lights to be on and above which you would not want the lights to be on 3 Start the internal self programming mechanism by pressing Utilities Set Light Level OK on the HP2000 The detector takes a measurement adds a small amount and stores the...

Отзывы: