1. Introduction
4
VPC-500 Series User’s Manual
・
Do not use or store this product in a location exposed to high or low temperature that exceeds range
of specification or susceptible to rapid temperature changes.
Example:
- Exposure to direct sun
- In the vicinity of a heat source
・
Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this
product with its interior penetrated by water or any other fluid or conductive dust. If this product
must be used in such an environment, install it on a dust-proof control panel, for example.
・
Avoid using or storing this product in locations subject to shock or vibration that exceeds range of
specification.
・
Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such
products will cause this product to malfunction.
・
To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or
discoloration of the paint.
・
This product’s case may become hot. To avoid being burned, do not touch that section while this
product is in operation or immediately after turning off the power. Avoid installation in a location
where people may come into contact with that section.
・
CONTEC does not provide any guarantee for the integrity of data on SSD.
・
Always remove the power cable from the power outlet before mounting or removing an expansion
board and before connecting or disconnecting a connector.
・
Always remove the power cable from the power outlet before connecting or disconnecting a
connector.
・
To prevent corruption of files, always shutdown the OS before turning off this product.
・
CONTEC reserves the right to refuse to service a product modified by the user.
・
In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power
cord immediately and contact your retailer.
・
Use an AC cable that matches the power supply voltage and outlet plug that you are using. (The
included cable is designed for use with a 125 VAC power supply.)
・
To connect with peripherals, use a grounded, shielded cable.
・
The SSD card connector doesn't support hot plug. The pulling out opening of the SSD card cannot
be done in the state of power supply ON. Please neither pulling out opening of SSD in the state of
power supply ON of this product nor come in contact with SSD. This product may malfunction or
cause a failure.
・
If you use any other SSD than our SSD, we can not guarantee this product’s specification. When
you newly select SSD for this product, you should read “Chapter 7” at first. If you select
unpreferable SSD, the system may work out of order.
・
Component Life:
(1) Power ----- During continuous operation at 40
℃
, the assumed life is about 4 year (vertical
installation). However, it may be shortened due to operation temperature (high
temperature).
CAUTION
