Contec PT-955SHX, Руководство пользователя

Страница: 41 / 95

5. BIOS Setup
34
PT-955SxX User’s manual
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the Page Up and Page
Down keys to change entries, press <F1> for help and press <Esc> to quit. The following table provides
more detail about how to navigate in the Setup program using the keyboard.
Table 5.1. Using Setup
Key Function
Up Arrow Move to the previous item
Down Arrow Move to the next item
Left Arrow Move to the item on the left (menu bar)
Right Arrow Move to the item on the right (menu bar)
Esc
Main Menu: Quit without saving changes
Submenus: Exit Current page to the next higher level menu
Move Enter Move to the item you desired
+ key Increase the numeric value or make changes
- key Decrease the numeric value or make changes
F1 key General help on Setup navigation keys
F2 key Load the previous setting value
F3 key Load the optimized defaults
F4 key Save all the changed settings to the FLASH ROM and exit
Getting Help
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible
selections for the highlighted item. To exit the Help Window press <Esc> key again.
In Case of Problems
If you cannot boot the computer after using Setup to change and save system settings, the computer will
have to be repaired. The best advice is to only alter settings which you thoroughly understand. To this end,
we strongly recommend that you avoid making any changes to the chipset defaults. These defaults have
been carefully chosen by both AMI and your systems manufacturer to provide the absolute maximum
performance and reliability. Even a seemingly small change to the chipset setup has the potential for
causing you to use the override.
A Final Note About Setup
The information in this chapter is subject to change without notice.