Contec PT-955SHX, Руководство пользователя

Страница: 14 / 95

2. System Reference
PT-955SxX User’s manual
7
2.
System Reference
Specification
Table 2.1. Functional Specification < 1 / 2 >
Model PT-955SLX-DC6xxx PT-955SHX-DC6xxx
Assembly type 12.1 inches panel mount type 15 inches panel mount type
CPU Intel
®
Atom™ Processor N2600 1.6GHz
Chip set Intel
®
NM10
BIOS BIOS (mfd. by AMI)
Memory 2GB (204pin SO-DIMM Socket x 1), PC3-8500 DDR3 SDRAM
Graphic Controller Intel
®
GMA3650 (Built in Intel
®
Atom™ Processor N2600),
Multi-monitor function supported *1
Video RAM Main memory shared
Video BIOS 64KB(C0000H-CFFFFH)
LCD type LCD type 12.1-inch TFT color LCD, XGA(1024 x 768),
260,000 colors 15-inch TFT color LCD, XGA(1024 x 768),
260,000 colors
Backlight LED method, The ON/OFF software can control.
Touch panel
*2 Resolution 4096 x 4096 (emulated in 1024 x 768 mode)
Detection
method Resistive-film analog type
Connection Internal serial port
External
display
output DVI *3 640 x 480, 800 x 600, 1,024 x 768, 1,280 x 768, 1,280 x 1,024, 1,360 x 768, 1,400 x 1,050,
1,600 x 900, 1,600 x 1,200, 1,920 x 1,080, 1,920 x 1,200 (16,770,000 colors)
Analog RGB 640 x 480, 800 x 600, 1,024 x 768, 1,280 x 768, 1,280 x 1,024, 1,360 x 768, 1,400 x 1,050,
1,600 x 900, 1,600 x 1,200, 1,920 x 1,080, 1,920 x 1,200 (16,770,000 colors)
Audio HD Audio compliant, LINE OUT x 1, MIC IN x 1
SATA Serial ATA 3Gb/s CFast Card 2slot
LAN*4 Realtek 8111E Controller
1000BASE-T/100BASE-TX/10BASE-T RJ-45 connector x 2 (Wake On LAN support)
USB USB 2.0-compliant 4 port
Serial RS-232C 3 port (one of the ports is used for touch panel), Baud rate: 50 - 115,200bps
General-purpose I/O None
Hardware monitoring Monitoring CPU temperature, board temperature, power voltage
Watch dog timer Software programmable, 255 level (1sec - 255 sec), Causes a reset upon time-out.
Real-time clock
The real-time clock is accurate within  3 minutes (at 25  C) per month,
Lithium backup battery life : 10 years or more
Power Management Power management setup via BIOS, Power On by Ring / Wake On LAN,
Supports ACPI Power management
*1: A multi-screen display function using the main LCD and an external display. The
“
Twin
”
option is, however, not
available for a combination with an external DVI-connected display.
“
Extended desktop
”
or
“
Intel
®
dual display
clone
”
can be used instead.
*2 The touching error precision is within 1.5% in the 10mm of the outer circumference of the area that can be touched
and is within 1% in all other parts of the area.
*3: Display of the DVI-connected screen becomes active after the Windows starts up.
*4: Care about ambient temperature when using 1000BASE-T. Refer to “Installation Requirements” in chapter 3 for
details.