Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E Скачать руководство пользователя страница 14

Страница: 14 / 99

1. Before Using the Product

AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E

Handling Precautions

DANGER

Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in

an explosion, fire, electric shock, or failure.

CAUTION

There are switches and jumpers on the board that need to be set in advance.

Be sure to check these before installing to the expansion slot.

Only set the switches and jumpers on the board to the specified settings.

Otherwise, the board may malfunction, overheat, or cause a failure.

Do not strike or bend the board.

Otherwise, the board may malfunction, overheat, cause a failure or breakage.

Do not touch the board's metal plated terminals (edge connector) with your hands.

Otherwise, the board may malfunction, overheat, or cause a failure.

If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.

Do not install or remove the board to or from the expansion slot while the computer's power or

expansion unit is turned on.

Otherwise, the board may malfunction, overheat, or cause a failure.

Be sure that the personal computer power is turned off.

Make sure that your PC or expansion unit can supply ample power to all the boards installed.

Insufficiently energized boards could malfunction, overheat, or cause a failure.

The specifications of this product are subject to change without notice for enhancement and quality

improvement.

Even when using the product continuously, be sure to read the user’s guide and understand the

contents.

Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting

from modifying this product.

Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever

(including damages for loss of business profits) arising out of the use or inability to use this

CONTEC product or the information contained herein.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E




































































































Результаты поиска

Содержание PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Отзывы:

Похожие инструкции для PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Бренды по названию

Популярные бренды

Contec PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E, Руководство пользователя

Результаты поиска

Содержание PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Отзывы:

Похожие инструкции для PCI-bus Analog Input Multi-Function Board AD12-16(PCI)E

Бренды по названию

Популярные бренды