3. Hardware Setup
20
User’s Manual
Installing the Hard Disk
(1) Remove the Hard Disk bracket from the IPC-BX720-AC.
Figure 3.10. Removing the Hard Disk Bracket
(2) Install the hard disk (silicon disk) to the hard disk bracket. Plug the HDD into the socket first, then
fasten it with four screws.
Fasten the disk using the outer or inner hole depending on the model you are using. (The figure
below shows an example that uses the inner screw hole.)
Figure 3.11. Installing the Hard Disk to the bracket
CAUTION
Connect the HDD cable in alignment with pins from the left end of the connector on the HDD side.
Four master/slave setting pins are left unconnected on the right side. Be aware that connecting the
power with the connector misaligned will damage the cable.
