CONSTRUCTA CHM1264S, Руководство пользователя

Страница: 4 / 14

8
481-031C_v01
Operation with liquidising disc
●
Liquidizing disc is used for liquidizing boiled fruit and
vegetables such as: carrots, potatoes, tomatoes, apples
through the sieve. It partly replaces the function of the
mixing adapter.
1 Insert the liquidizing disc on the whisk with toothed bar
from the bottom side.
2 Insert the whisk into the socket marked with a star.
Operation with stand including turnable bowl
The stand with assembled motor part makes the operation
with whisks or mixers easy, as the user does not have to hold
the device.
The housing with the bowl is equipped with a self-
gathering spatula, which is an innovative solution.
It helps to effectively blend the products, prevents the dough
from gathering on the edges of the bowl and shortens the
preparation time.
The stand head driver automatically makes the head move
pendulum-like and simultaneously turns the bowl with the
mixed product.
You can use the stand with specially prepared whisks and
mixers only. The device equipped with stand includes also
one mixer and one whisk with toothed bar.
1 Insert the mixers or whisks into the motor casing
(as described above).
2 Assemble the drive in the stand head after moving the
cover the following way: Insert the drive fasteners (which
are located near the holes for whisks assembling) under the
stand head fastener.
3
Turn the control clamp to the limit in such a way that the
hand is positioned vertically.
4 Press the fastener button and simultaneously deflect the
stand head with the motor part back.
5 Place the bowl on the 3 lips of the stand and put it on the
stand base.
6 Attach the bowl scraper attachment and put ingredients
into the bowl.
7
Place the stand head with the motor part in horizontal
position (you will hear the clicking sound of fastener blocking
clamps).
8 Start-up the mixer with the switch lever and it will make
the bowl turn and the head with drive move pendulum-like.
Never block or stop the oscillatory movement
during operation. It may cause damage to the
housing.
After operation
●
Switch the mixer off and unplug it.
Depending on assembled equipment:
1 Push the whisks or mixers out with a pushing button.
2 Disassemble the liquidizing disc from the whisk.
D
E
F
3 Deflect the stand head with the motor part back. Turn
the clamp knob in counter clockwise direction as much as
possible and put the motor out of the head fasteners.
●
Wind the cord onto the motor.
Cleaning and maintenance
Remember to unplug before cleaning and maintenance.
●
Clean the whisks and mixers with warm water with
cleaning agents.
●
Clean the cogged rim of rotational bowl with dishes
cleaning brush.
●
Turn the bowl upside down after cleaning and pour out
the water, which could remain under the cogged rim.
●
Dry the mixer equipment after cleaning and store in dry
place.
●
Clean the motor or stand casing with dump cloth and
then dry it.
Ecology – environment protection
Each user can protect the natural environment.
It is neither difficult nor expensive. In order to
do it: Put the cardboard packing into recycling
paper container, Put the polyethylene (PE)
bags into container for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appliance,
which can be hazardous for natural environment.
Do not dispose the appliance with the municipal waste!
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling.
The manufacturer reserves his rights for modifying the product any
time in order to adjust it to law regulations, norms, directives, or due
to construction, trade aesthetic or other reasons, without notifying it
in advance.