Step 3a: You will now attach the wires to the chip using solder.
We use several color wires here to help show where each wire goes. Your kit will contain 5 colors of wire.
Notch
7 6 5 4 3 2 1
Starting with pins 1-7:
•
Pin 1:
This is the power wire and is red in the image, this
wire should be aprox 2.5 inches long.
•
Pin 2:
This is the white wire and is for the Mod button you will
install , this wire should be 2.5” long
•
Pin 3:
This is the Yellow wire and is for the Fast Reload
button you will install , this wire should be 5” long
•
Pin 5:
This is the Green wire and will go to the RB button,
this wire should be 3.5” long
•
Pin 7:
This is the Blue wire will go to the Left trigger, this wire
should be 5” long
•
tip: Only strip about 1/8” of the wire for soldering. Exposing
more bare wire could cause a short.
•
tip: For information on proper soldering visit
http://www.curiousinventor.com/guides/How_To_Solder
