Controller Identification
• Before you get started you need to make sure that you have the correct controller type for this installation. Our MaxFire FUSION
Chip requires a CG or CG2 PCB inside your controller. This chip CANNOT be installed into a matrix style controller. The Left side
images show the board from behind the battery door (no need to open the controller) and the right side is with the controller open.
Matrix PCB
From the battery door area you
can see that there is no
Capacitor on the left side while
the other two versions do have a
capacitor.
CG PCB
From the battery door area you
can see that the Capacitor is
horizontally oriented.
CG2 PCB
From the battery door area you
can see that the capacitor is
vertically oriented.
