9
Fig. 16 Connect collectors to solar circuit. Later check for leak tight-
ness! ATTENTION: Danger of burns at connections during solar irra-
diation!
Fig. 17 Pipe lead with sarking membrane: make a T-shape cut into
the sarking, lead through the connection hose and close cuts with ap-
propriate tape. Inside the roof connect the collector connection hose
(stainless steel, 18 mm) to the solar circuit, for example via double
socket or compression ring coupling.
Fig. 18 Slip rubber seal over cable, insert solar sensor into sensor
sleeve; close opening with rubber seal and lead cable through roof.
Fig. 19 Position wooden support along collector and fasten with
4 x 35 and 5 x 120 self tapping screws.
Fig. 20 Adjust roof tiles/slates below collectors; fix with self tapping
screws.
Fig. 21 Fix metal clips for lower flashing sheet (1) and fold onto tile
or slate (2).
