Model VC940: OPERATING MANUAL
15
Chapter 4
Using Stores, Recall & Send Features
Introduction
Chapter 4 shows you how to use stores, recall and communication features available on the Meter
Storing and Clearing Readings
To store readings, proceed as follows:
z
Press
STORE
once, STO and no appears to confirm the operation and the left secondary display shows the current measurement reading. Press
to toggle between
clearing the stored readings and start from the zero readings or start from the last stored reading.
z
Press
STORE
the second time, STO appears. The left secondary display shows the storing time interval in second, it is preset to zero. To change the interval in second
by pressing
+
or
-
button. The interval can be as high as 255 seconds or as low as 0 second. Press and hold
STORE
to access the quick setting.
z
Press
STORE
the third time, STO and no appears. The left secondary display shows the index number and store a reading. The right secondary display shows the
current stored reading, the primary display shows the current measurement reading.
z
If there is not set time to store the reading, each press of
STORE
to store one reading. An index number increase one.
z
The maximum number of stored reading is 10. When the stored readings memory is full, the Meter will stop storing data.
z
To exit, press
EXIT
.
Recalling Stored Readings
Use the following procedure to recall the stored reading:
z
Press
RECALL
to recall the stored value and RCL appears to confirm the operation.
z
The left secondary display shows the index number no.---.
z
The primary display shows the corresponding recalled data.
z
The right secondary display shows the total number of the stored data.
z
Press
button to enable the SEND feature to export the data to the computer via RS232C or USB. The software shows the data storing time and also the data value..
After the data transferring is completed, the SEND feature will be disabled automatically.
z
Press
+
or
-
button to view additional stored reading. Press and hold
RECALL
to access quick recalling.
z
Press
EXIT
to exit recalling.
Using Send
When using a Send feature, please refer to the Installation Guide of the included CD-ROM.
,
Содержание VC940
Страница 21: ...Model VC940 OPERATING MANUAL 21 ...
