Conrad PL500D N150, Руководство пользователя

Страница: 20 / 38

20 Network configuration
Powerline Adapter PL500D N150
4.4.1 Device security
In this area you can control the access to the configuration interface as well
as enable and disable the functions of the interfaces and buttons on the
PL500D N150.
Password
You can set a login password for access to the configuration interface.
By default, the built-in configuration interface of the PL500D N150 is not pro-
tected with a password. However, we recommend assigning a password
when the installation of the PL500D N150 is complete to protect it against
tampering by third parties.
��� To do so, first enter (if present) the current password and then enter the
desired new password twice. Now the configuration interface is protected
against unauthorised access with your individual password!
��� Call up the configuration interface again later.
��� Enter admin in the User name field and your individual password in the
Password field.
The admin user name cannot be changed .
4.4.2 Network settings
The PL500D N150 also communicates via the TCP/IP protocol as a compo-
nent of your home network. The IP address required for this can either be
entered manually or obtained automatically from a DHCP server.
The option
Use this to accept network settings automatically from a
DHCP server is enabled in the factory defaults.
If a DHCP server is already present in the network for giving out IP
addresses, have the option
Use this to accept network settings automati-
cally from a DHCP server enabled so that the PL500D N150 automatically
receives an address from it.
You can also assign a static IP address by making entries under
IP address
(e.g. '192.168.0.249') and Netmask (e.g. 255.255.255.0).
If you happen to forget the IP address of your PL500D N150, proceed as
described under 'Calling up the built-in configuration interface'.