background image

  

 

Appendix    37

Powerline Adapter PL500D N150

1

Warranty coverage 

a) The warranty covers the equipment delivered and all its parts. Parts will, at the manufac-

turer's sole discretion, be replaced or repaired free of charge if, despite proven proper han-

dling and adherence to the operating instructions, these parts became defective due to 

fabrication and/or material defects. Alternatively, the manufacturer reserves the right to 

replace the defective product with a comparable product with the same specifications and 

features. Operating manuals and possibly supplied software are excluded from the war-

ranty.

b) Material and service charges shall be covered by the manufacturer, but not shipping and 

handling costs involved in transport from the buyer to the service station and/or to the man-

ufacturer.

c) Replaced parts become property of the manufacturer. 
d) The manufacturer is authorized to carry out technical changes (e.g. firmware updates) 

beyond repair and replacement of defective parts in order to bring the equipment up to the 

current technical state. This does not result in any additional charge for the customer. A 

legal claim to this service does not exist.

2

Warranty period

The warranty period for this product is two years. This period begins at the day of delivery from 

the manufacturer's dealer. Warranty services carried out by the manufacturer do not result in an 

extension of the warranty period nor do they initiate a new warranty period. The warranty period 

for installed replacement parts ends with the warranty period of the device as a whole.

3

Warranty procedure

a) If defects appear during the warranty period, the warranty claims must be made immedi-

ately, at the latest within a period of 7 days. 

b) In the case of any externally visible damage arising from transport (e.g. damage to the 

housing), the person carrying out the transportation and the sender should be informed 

immediately. On discovery of damage which is not externally visible, the transport company 

and the sender are to be immediately informed in writing, at the latest within 3 days of deliv-

ery. 

c) Transport to and from the location where the warranty claim is accepted and/or the repaired 

device is exchanged, is at the purchaser's own risk and cost. 

d) Warranty claims are only valid if a copy of the original purchase receipt is returned with the 

device. The manufacturer reserves the right to require the submission of the original pur-

chase receipt.

4

Suspension of the warranty

All warranty claims will be deemed invalid
a) if the label with the serial number has been removed from the device, 
b) if the device is damaged or destroyed as a result of acts of nature or by environmental influ-

ences (moisture, electric shock, dust, etc.),

c) if the device was stored or operated under conditions not in compliance with the technical 

specifications,

d) if the damage occurred due to incorrect handling, especially to non-observance of the sys-

tem description and the operating instructions,

e) if the device was opened, repaired or modified by persons not contracted by the manufac-

turer,

f)

if the device shows any kind of mechanical damage, or

g) if the warranty claim has not been reported in accordance with 3a) or 3b).

Содержание PL500D N150







































Отзывы: