Conrad PL500D N150, Руководство пользователя

Страница: 16 / 38

16 Installation
Powerline Adapter PL500D N150
Note the WiFi key of the PL500D N150 before the networking procedure. You
will find the unique adapter key on the label on the back of the housing.
��� Use a network cable to connect the PL500D N150 to network port of your
computer or other network device.
If you only want to use the Wi-Fi function on the PL500D N150, plug the
adapter into a power outlet, without any cables whatsoever. (see 'Example
applications')
���
Plug the PL500D N150 into a wall socket. As soon as the indicator light
of the PLC button lights green (after approx. 45 seconds), the adapter is
ready to operate.
Note: The power outlet should be in range of the connected network device.
The PL500D N150 with the cable-based network device should be easy to
access.
To switch off the PL500D N150 or disconnect it from the mains supply, pull
the power plug out of the power outlet.
��� A PLC network is set up as soon as at least one other PLC adapter has
been connected and plugged into the mains supply. To secure your PLC
network individually, continue with your PLC network configuration. For
more information, refer to the chapter 'Configuring the PLC network'.
��� In order to connect the PL500D N150 via Wi-Fi with your laptop, tablet or
smartphone, enter the previously noted WiFi key as the network security
key.
���
If you would like to connect additional adapters, proceed as just
described. For more information, also read Chapter 'Quickstart'.
���
In order to secure your Wi-Fi network individually, carry out your network
configuration. For more information, refer to Chapters 'Installing the soft-
ware' and 'Network configuration'.