Conrad PL500D N150, Руководство пользователя

Страница: 29 / 38

Network configuration 29
Powerline Adapter PL500D N150
WiFi Sync support enabled
��� Also press the PLC button of the PL500D N150 adapter for which the
entire Wi-Fi configuration is to be transferred to all other PL500D N150
adapters.
��� Then tap each PLC button of the other PL500D N150 adapters.
��� All PL500D N150 adapters are now continuously connected to each
other and, from now on, share changes to the Wi-Fi configuration with
each other automatically.
In the factory default settings of the PL500D N150, the Wi-Fi function is ena-
bled and the Wi-Fi encryption WPA2 is configured. The default WiFi key is
the WiFi key of the corresponding device. You will find the key on the label
on the back of the housing.
4.6 Management
In the Management area you can reset the current configuration to the fac-
tory defaults, save it to your computer as a file or restore it from there and
update the firmware of the PL500D N150.
4.6.1 Resetting the configuration
With the Management -> Reset configuration command, the PL500D N150
is reset to the original factory defaults. In doing so, you lose your personal
settings. The last-assigned PLC password for the PL500D N150 is also reset
to the PLC standard password
HomePlugAV . To secure your PLC network
individually again, reconfigure it by using either the encryption button (see
Chapter 'Configuring the PLC network').
You can change the PLC password by using the configuration software under
Device configuration -> PLC settings or by using the encryption button .
For backup purposes, all active configuration settings can be transmitted to
your computer, stored there as a file and reloaded into the PL500D N150. In
this way, you can for example generate configurations for different network
environments, with which you can set up the device quickly and easily.