Conrad CV Mobil 4200 FM, Инструкция по эксплуатации

Страница: 22 / 32

4
Front view
Rear view
Installation of the radio
You can either operate your CV mobil 4200 FM in the car or at home as a base
station. For installation as a mobile station in the car, a mobile mount device is
enclosed. Mount the set in such a way that it is not exposed to direct sunlight if
possible, as this would lead to an increase in the temperature and can decrease the
(set’s) working life. The set should also not be installed near a heater. Mount the set
in such a way that it is exposed to as little vibration as possible.
The mobile fixing device should be attached to the dashboard, the tunnel slot or to
any other suitable place using the enclosed tapping screws. Do not install the set in a
place where it could cause injuries in the case of an accident (be careful to ensure
free leg movement). Take care not to damage any underlying hidden wires during
installation! Please do not mount the device on or close to an airbag.
Then insert the radio into the mobile mount device. Secure the set with the large
knurled screws (using the enclosed plastic washers) firmly at the required angle.
Squelch
Receive Volume
Antenna socket
50 Ohms
PL-259 Standard
DC power cable
13.8 V
External speaker
8 Ohms, min. 2 W
On / Off
LED-Channel Display
TX-FM
control LED’s
Double Function
Channel / Country switch
AM-FM Switch
Brand Plate with
country switching
decription
4 pin MIC socket