Conrad C-Control Pro Mega Series, Руководство пользователя

Страница: 74 / 240

65 C-Control Pro Mega Series
© 2008 Conrad Electronic
4.3.2 Outputs
For display of Debug messages there is an "Outputs" window section.
Here is shown when the Bytecode Interpreter has been started and terminated and for how long (in
milliseconds) the Interpreter was in operation. The operation time however is not very useful if the
Interpreter has been stopped during Debug Mode.
The Outputs window can also be used to display the user’s own Debug messages. For this there are
several
Debug Functions .
With a right mouse click in the Debug Outputs section the following commands can be selected:
·
Delete – will delete the list of Debug outputs
·
Copy to Clipboard – will copy all text messages onto the clipboard
4.3.3 PIN Functions
Some solitary functions of the Interpreter can be protected by use of an alpha-numeric PIN. If an
Interpreter is protected by a PIN normal operations are prohibited. By means of a new transfer the
Interpreter can be overwritten, the PIN will however stay preserved. Also a normal start other than
the
Autostart behaviour is no longer allowed. Furthermore the scans of hardware and firmware
version numbers are locked.
If access to a forbidden function is tried a dialod with the following text will be displayed: " C-Control
is Password protected. Operation not allowed! ".
Through inscription of the PIN with Enter PIN in the C-Control Menu all operations can again be
released.
In order to enter a new PIN or to delete a set PIN there are the commands Set PIN and Delete PIN in
the C-Control Menu. If there is an old PIN in exitence then the Module must of course first be
unlocked by entering the old PIN. The PIN can have a length of up to 6 alpha-numeric characters.
In case the password has been lost there is an emergency function which can be used to reset
the Module to its initial state. In C-Control there is the option Reset Module which can be used to
delete PIN, Interpreter and Program.