Conrad C-Control Pro Mega Series, Руководство пользователя

Страница: 12 / 240

3 C-Control Pro Mega Series
© 2008 Conrad Electronic
1.3 Handling
The C-Control Pro Unit contains sensitive components. These can be destroyed by electrostatic
discharges! Please observe the general rules on handling electronic components. Please organize
your working bench professionally. Ground your body prior to any work being done, e. g. by
touching a grounded and conducting object (e. g. heating radiator). Avoid touching the connection
pins of the C-Control Pro Unit.
1.4 Intended use
The C-Control Pro Unit is an electronic device in the sense of an integrated circuit. It serves the
programmable controlling of electric and electronic equipment. Construction and operation of this
equipment must be in conformance with the valid European licensing principles (CE).
The C-Control Pro must not be galvanically connected to voltages exceeding the directed Extra
Low Protective Voltage. Coupling to systems with higher voltages must exclusively be performed
by use of components having VDE qualification. In doing so the directed air and leakage paths
must be observed as well as sufficient precautions for protection against touching dangerous
voltages must be taken.
The PCB of the C-Control Pro Unit carries electronic components with high frequency clock
signals and steep pulse slopes. Improper use of the unit may lead to the radiation of electro-
magnetic interference signals. The adoption of proper measures (e. g. the use of chokes, limiting
resistors, blocking capacitors and shielding's) to ensure the observance of legally directed
maximum values lies in the responsibility of the user.
The maximum allowable length of connected wire lines is without additional precautions appr. 0.25
Meters (Exception: Serial Interface). Under influence of strong electro-magnetic alternating fields
or interference pulses the function of the C-Control Pro Unit can be detracted. If need be a reset or
a restart of the system may become necessary.
During connection of external sub-assemblies the maximum admissible current and voltage values of
the particular pins must be observed. The connection of too high a voltage, a voltage of wrong
polarity or an excessive current load may lead to immediate damage of the unit. Please keep the C-
Control Pro Unit away from spray water or condensation dampness. Observe the safe operating
temperature range in Item Technical Data in the attachment.
1.5 Warranty and Liability
For the C-Control Pro Unit Conrad Electronic grants a warranty period of 24 months from the date
of billing. Within this time period faulty units will be replaced free of charge if the fault provable
originates in faulty production or loss on goods in transit.
The software in the operating system of the Microcontroller as well as the PC software on CD-
ROM is shipped in the form as is. Conrad Electronic can not guarantee that the performance
features of this software will satisfy individual requirements and that this software will operate free
of faults and interruptions. Conrad Electronic can further not be held liable for damages occurring
directly by or consequently to the use of the C-Control Pro Unit. The use of the C-Control Pro Unit