Conrad C-Control Pro Mega Series, Руководство пользователя

Страница: 79 / 240

70 IDE
© 2008 Conrad Electronic
The other possibility is by use of the context menu in the variables list which can also be activated
by a right mouse click.
When
Insert Variable is selected then the variable to be monitored can as text be entered into the
list. In case of a local variable the function name with a preceeding colon (Function Name :
Variable Name) is entered. With
Change Variable the text entry in the list can be altered and with
Delete Variable the variable can be entirely erased from the list. Prior to this the line holding the
variable to be deleted must be selected. The command Delete All Variables will delete all entries
from the list.
Under certain circumstances an error message is shown instead of a value in the list:
no Debug Code No Debug Code has been generated
wrong Syntax During text entry invalid characters have been entered for a
variable
Function unknown The Function Name is not known
Variable unknown The Variable Name is not known
not in Debug Mode The Debug Mode has not been activated
no Context Local variables can only be displayed while within this function
not actual The content of the variable has not been updated
If a high number of variables is entered in the monitor list it may during single step operation take
quite some time until all variable contents from the module have been scanned. For this reason the
Option
Auto Actualize can be switched off for individual variables. The contents of these variables will
then only be displayed after the command Actualize Variable is executed. This way the Debugger
can quickly be operated in single steps and the contents are only actualized on demand.