42
Holding the manual temperature without limitation
• Set the desired temperature manually with „
“ and „
“. For quick adjustment,
hold down the corresponding button for an extended period of time.
„
“ is displayed.
• Press the „
“ button
thrice
.
• The display shows the symbol „
“ and the alternating display of time/temperature.
• Confirm the setting with „
“.
To terminate the manual temperature selection prematurely, press „
“. The
symbol „
“ disappears, the room thermostat works again with the temperature
curves programmed by you.
i) Alarm/Wake-up Function
Switching on the alarm/wake-up function, setting the alarm/wake-up time.
• Keep the button „
“ pressed (approx. 3 seconds) until „AL“ appears at the top of the
display.
• Press „
“. The pre-set alarm/wake-up time appears (e.g. „0:00“) together with the
symbol „
“.
• Select the day block on which the wake-up sound is to be output with the buttons „
“
and „
“.
1 2 3 4 5
Monday to Friday
1 2 3 4 5 6 7
Monday to Sunday
6 7
Saturday and Sunday
• Press „
“. The hours of the alarm/wake-up time flash.
Set the hours with the „
“ and „
“ buttons. For quick adjustment, hold down the
corresponding button for an extended period of time.
• Press „
“. The minutes of the alarm/wake-up time flash.
Set the minutes with the „
“ and „
“ buttons.
• Press „
“ to return to the day block selection, if desired.
• Confirm the setting with „
“. The device leaves the setting mode.
If you do not press any button for an extended period of time, the settings are
stored automatically, and the device leaves the setting mode.
