Connection Co.Table, Руководство по сборке

Страница: 6 / 20

5
16. Co.Table lamp will come with
large metal plate at the
bottom of the stem, which
needs to be removed to
allow for insertion into utility
rail. Lamp will only have
short power lead
17.
Once lamp has been
inserted into utility rail
and cable thread through,
reattach metal plate by
sliding in place. Tighten nut to
secure the lamp in place. This
will need repeating for each
18. Multiple Co.Table lamps will need to be connected to a
distributor block to allow for cables to run out of table. A
2.0m extension cable will be provided to connect Co.Table
lamp cable to distributor block. Once both are connected to
a distributor block, a 5m extension cable will be connected to
allow cable to run out of table
Please note that light bulbs will not be included.
19. Each laminate table top will come with a hole cut out as
standard. These allow for power to run from the utility rail
through the table. Position the utility rail onto the table, with
the power brackets central over these holes
16
17
19 18
Assembly Instructions
Co.Table