Connection Co.Table Скачать руководство пользователя страница 2

Страница: 2 / 20

Assembly Instructions

Co.Table

2 person assembly is required to build any Co.Table configuration.

2,600mm diner table assembly

For 3,990mm diner table assembly, please proceed to page 8.

Components

• 2,600mm metal underframe

• 2,600mm utility rail

• 4x diner table legs

• 2x end laminate table tops (these could be

D-end, square ends or poseur attachment

ends depending on product order)

• 2x utility rail end caps

• 2x utility rail end cap brackets

• 2x large utility rail brackets

• 2x small utility rail brackets

• 2x under panels

• 2x under panel brackets
If your Co.Table includes a poseur table, proceed

to steps 1-11 on page 14 once completing

this section.

Fixing kit

Your 2,600mm Co.Table fixing kit will consist of

the following:

• M6 x 16 furniture bolt

• Wooden biscuit

• Double pins

• Cam covers

• M8 x 50 socket head

• M8 x 30 washer

• M4 square nut

• M4 x 12 button head

• 10x 5/8 self tap

• 12x 1” Pozi selftap CSK screws

• M6 x 8 button head

Building the frame and adding legs
1.

Unwrap 2,600mm metal underframe and place in space close to where the table will situate.

There are corners of the metal underframe removed to allow for table legs to be attached

Screws to connect legs to metal underframe can be found already attached to the legs. Note

that all legs will allow for power to run down

Remove screws from leg, face leg up to outside corner of the metal underframe and reattach

the screws by threading through the inside of the frame and back into the leg. Initially screw

loosely. Note: It may be easier to connect legs with frame on its back and wooden legs in the air

Содержание Co.Table





















Результаты поиска

Содержание Co.Table

Отзывы:

Похожие инструкции для Co.Table

Бренды по названию

Популярные бренды

Connection Co.Table, Руководство по сборке

Результаты поиска

Содержание Co.Table

Отзывы:

Похожие инструкции для Co.Table

Бренды по названию

Популярные бренды