Connection Co.Table, Руководство по сборке

Страница: 12 / 20

11
Connecting the power cables
Note: Step 13 refers to standard Connection Co.Table power bracket consisting of 2 power pockets
and 1 dual USB power socket. Assembly instructions refer to this power only. A maximum of 6 power
sockets to be connected per distributor. Our standard power fits with this safety requirements. If
your power brackets differ then please contact our customer services.
14. Once all power brackets are in place then they all need to be connected via a distributor block
to run wires down leg and out of Co.Table
15.
Connect the three leads from the power sockets into the distributor, leaving space for one more
lead. Lead from 5m extension cable will be connected into distributor. Power cable set up is
now complete
If your Co.Table has been specified with lamps you will additionally receive lamp stems, distributor
blocks, 2.0m cable and 5.0m cables with original components.
14 15
16. Co.Table lamp will come with
large metal plate at the
bottom of the stem, which
needs to be removed to
allow for insertion into utility
rail. Lamp will only have
short power lead
16
Assembly Instructions
Co.Table