Connection Co.Table, Руководство по сборке

Страница: 11 / 20

10
9. Repeat stage 8 to attach the second
end laminate table top. Once laminate
table tops have been securely
connected together, they can then be
connected to the table. Image right
shows the corner positions on the
underside of the table top. Position
table holes over holes on the top of
under frame. Secure the table to the
frame using M6 x 16 furniture bolts
Once this has been complete, the
laminate table tops are now secured to
the frame and structure.
Adding the utility rail
and power
Utility rail will always need
attaching but power
instructions in step 13 and
any reference onwards would
only be applicable if power
has been specified on
Co.Table order.
Your 3,990mm table will come
with utility rail with 3 power cut
outs, 3 power holes per cut out.
10. Preparation is needed on
utility rail before connecting
to table. Screw utility rail end
cap bracket to either end of
the utility rail using 2x 12 x 1”
pozi self-tap CSK screws
11. Face both utility rail end caps
over the utility rail end cap
brackets and secure in place
with M6 x 8 button heads
12. Slide 2x M4 square nuts into
the track of the utility rail.
This allows for the power
to be connected to the rail.
Ensure that there is an M4
square nut on either side of
the 3 power cut outs
13.
Position power brackets
over the top of the M4
square nuts and screw
in place with 2x M4 x 12
button heads. Repeat for all
power brackets
9
10
11
12
13
Assembly Instructions
Co.Table