Connection Electronics MFC98 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 55

background image

DX-1S DIGITAL PABX - MFC98 Manual

10-1

10. MENU

PROGRAMMING

MODE

Menu Programming mode is designed to facilitate the DX-1S programming in a more user-friendly way.
The programming items available here are the same as in DOS PROGRAMMING MODE. Programming
item changed in Menu Programming Mode will have the same effect as changed in DOS Programming
Mode.

In Menu Programming mode, user cannot enter the programming command as in DOS Programming
Mode. Users are required to select the item to program from the three sub-menus. They are System,
Programming and Advanced feature.

The programming items are grouped by their function under the three sub-menus. They can be identified
by their name only, since no item number will list in Menu Programming Mode.

When selecting programming item, the existing programming setting will be displayed. There may also
have description on the item appear next to the displayed value. To change the setting, just modify the
displayed setting and press “ENTERS” key. After finish a screen of programming, click the “OK” or
“CLOSE” button to confirm change.

Please refer to the DX-1S Programming Manual for the details of programming.

10.1 ENTER MENU PROGRAMMING MODE

The Menu Programming Mode is one of two programming modes in MFC98. Maintenance persons can
enter the Menu Programming Mode by entering the same password as in DOS Management Mode.

If there have another console already in programming mode, system will refuse another console to enter
programming mode again.

Operation

1.

Press the “F5” key in the console keyboard or Select Menu Programming Mode from MENU button
window in Attendant Console Mode

2.

Menu Programming Mode Password Inquiry window is displayed as in following figure.

Figure 10-1 MENU PROGRAMMING MODE PASSWORD INQUIRY WINDOW

3.

Enter Password of Menu Programming Mode in the console keyboard and press “Enter” key or click
“OK” button.

4.

If the password is incorrect, an error message will display and system will quit the inquiry window.
You need to re-do from step 1.

5.

If the password is correct, the Menu Programming Mode Screen will be displayed as following.

«
...
41
42
43
44
45
...
»

Содержание MFC98
























































Отзывы:

Нет отзывов

Похожие инструкции для MFC98

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 3

Бренд: Panasonic Страницы: 2

KX-TC1461B - Cordless Telephone

Бренд: Panasonic Страницы: 6

Бренд: Panasonic Страницы: 23

KX-T7885 - Battery For

Бренд: Panasonic Страницы: 48

Бренд: Panasonic Страницы: 52

Бренд: Panasonic Страницы: 48

Бренд: Panasonic Страницы: 8

Бренд: Panasonic Страницы: 3

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 132

Бренд: Panasonic Страницы: 12

HYBRID IP-PBX KX-TDA200

Бренд: Panasonic Страницы: 824

EASA-PHONE KX-T30810

Бренд: Panasonic Страницы: 16

Бренд: Aastra Страницы: 2

Бренд: Aastra Страницы: 49

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды