ConMed Linvatec Hall PowerPro PRO6150, Инструкция по эксплуатации

Страница: 13 / 32

9
8. Before removing the instrument from the
regulator:
(a) Close the tank valve by turning it
clockwise.
(b) Activate the instrument to bleed off
line pressure.
(c) Turn the pressure regulator knob
counterclockwise until it stops.
(d) Turn the female Schrader to the right to
disengage the male Schrader fitting.
(e) The hose can then be removed from the
connector. Hold the end of the hose
securely when disengaging the male
Schrader fitting to prevent possible
damage to the diffuser.
9. If the Hall Pneumatic Connector* is being
used:
(a) Locate the button marked “PRESS”.
(b) Depress and hold the button until the
audible release of residual gas is
completed.
(c) Release the button and remove the
hose.
(d) If the hose cannot be easily removed,
depress the “PRESS” button again,
release it and remove the hose.