ConMed Linvatec Hall PowerPro PRO6150, Инструкция по эксплуатации

Страница: 19 / 32

15
3.1 Cleaning and Sterilizing
3.1.1 Cleaning Precautions
1. Follow universal precautions for protective
apparel when handling and cleaning con-
taminated instruments.
2. Do not lubricate any handpieces.
3. Never immerse handpieces or
attachments.
4. Never clean equipment in an automatic
washer/sanitizer.
5. Never clean handpieces with bleach, chlo-
rine-based detergents, liquid or chemical
disinfectants, or any products containing
sodium hydroxide (such as, INSTRU-
KLENZ or Buell Cleaner). They will
degrade the anodized aluminum coating.
6. Never clean equipment in an ultrasonic
cleaner.
7. Saw blades and bits are single-use
only. Do not resterilize. Dispose of
properly after use.
3.1.2 Handpiece Cleaning Instructions
Clean handpieces and attachments as soon as
possible after use.
1. Remove all attachments (chucks, saws) and
accessories (saw blades, bits) from the
handpiece prior to cleaning. Keep the hand-
piece hose attached.
2. Thoroughly scrub the handpiece, handpiece
hose, and attachments with a clean, soft
brush dampened with a mild, pH-balanced
detergent. Ensure the blade locking collet
on the oscillator handpiece is in the open
position and all debris is removed from this
area. Remove all traces of blood, debris and
stains. Do Not immerse equipment in soap
solution or rinse water.
3. To clean the cannulated section of the hand-
piece and attachment:
(a) Feed the wire end of a cleaning brush
through the cannulation of the hand-
piece or attachment.
(b) Pull the brush completely through and
repeat until all debris is removed.
4. Manipulate all moving parts of the hand-
piece and attachments to ensure all debris is
removed. If not, clean again until all debris
is removed.
5. Keeping the nose of the handpiece pointed
downward, rinse under running water to
remove all traces of soap. Rinse all attach-
ments likewise.
6. Flush all surfaces free of tap water with dis-
tilled water to prevent metal discoloration.
7. Gently shake the equipment free of water
and wipe the surfaces with a clean, lint-free
towel.