Copyright
©
2014
congatec
AG
TS87m13
60/124
Signal
Pin #
Description
I/O
PU/PD
Comment
SER0_TX
A98
General purpose serial port transmitter
O 3.3V
Supported on Rev. B.0 and later
SER1_TX
A101
General purpose serial port transmitter
O 3.3V
Supported on Rev. B.0 and later
SER0_RX
A99
General purpose serial port receiver
I 3.3V
PU 50k 3.3V
Supported on Rev. B.0 and later
SER1_RX
A102
General purpose serial port receiver
I 3.3V
PU 50k 3.3V
Supported on Rev. B.0 and later
Table 20 Power and GND Signal Descriptions
Signal
Pin #
Description
I/O
PU/PD Comment
VCC_12V
A104-A109
B104-B109
Primary power input: +12V nominal. All available VCC_12V pins on the connector(s)
shall be used.
P
VCC_5V_SBY
B84-B87
Standby power input: +5.0V nominal. If VCC5_SBY is used, all available VCC_5V_SBY
pins on the connector(s) shall be used. Only used for standby and suspend functions.
May be left unconnected if these functions are not used in the system design.
P
VCC_RTC
A47
Real-time clock circuit-power input. Nom3.0V.
P
GND
A1, A11, A21, A31,
A41, A51, A57, A60,
A66, A70, A80, A90,
A100, A110, B1, B11,
B21, B31, B41, B51,
B60, B70, B80, B90,
B100, B110
Ground - DC power and signal and AC signal return path.
All available GND connector pins shall be used and tied to Carrier Board GND plane.
P
