Copyright
©
2014
congatec
AG
TS87m13
2/124
Revision History
Revision Date (yyyy.mm.dd) Author Changes
0.1
2013.06.03
AEM
•
Preliminary release for Internal use
0.2
2013.09.30
AEM
•
Updated section 2.5.1
•
Updated section 5 “Onboard Temperature Sensors”
•
Updated section 10 “System Resources”
0.3
2013.11.05
AEM
•
Updated section 2.1 “Feature List”
•
Updated section 4.1 with Flat pipe heatspreader. Deleted section 4.2 ‘Heatspreader thermal Imagery
•
Updated table 2 in section 6.2.3 “Digital Display Interface”
•
Added UART support for rev. B.0 and later in sections 2.1 “Feature List”, 6.1.11 “General Purpose Serial Interface” and
table 18
1.0
2014.03.26
AEM
•
Updated COM Express concept in section 1 “Introduction”
•
Deleted the variant with PN:046809 from sections 1 “Introduction”, 2 ”Feature List” and 2.5 “Power Consumption”. This
variant is not on congatec’s roadmap. Added additional two variants with part numbers 046810 and 046811
•
Updated section 2.5 “Power Consumption”
•
Updated section 3 “Block Diagram”
•
Corrected pins D63 and D64 in section 9.4 “C-D Connector Pinout”
•
Added section 11 “BIOS Setup Description”
•
Official release
1.1
2014.07.09
AEM
•
Updated section 2.5 “Power Consumption”
•
Updated section 11 “BIOS Setup Description”
1.2
2014.10.24
AEM
•
Added note about the ULP mode in section 6.1.4 “Gigabit Ethernet”
•
Updated section 7.3 “Watchdog”
•
Updated section 8.2.5 “Intel Virtualization Technology”
•
Updated section 11 “BIOS Setup Description”
1.3
2016.15.07
AEM
•
Corrected the BIOS Aptio UEFI version in section 2.1 “Feature List”
•
Added section 4 “Cooling Solution”
•
Added Windows 10 to section 2.2 “Supported Operating Systems”
•
Updated section 6.1.10 “LVDS/eDP”
•
Update section 7.7 “congatec Battery Management Interface”
•
Updated section 10.3 “PCI Interrupt Routing Map”
•
Deleted the comment “not supported” for SUS_S4# signal in table 17 “Power and System Management Signal
Descriptions”. Corrected also the description of PWRBTN# signal
•
Deleted sections 12.3 “BIOS Security Features” and 12.4 “Hard Disk Security Features” due to duplication