manualshive.com logo in svg

Congatec 050100, Руководство пользователя

Поделиться
Скачать
Congatec 050100 Скачать руководство пользователя страница 4

Copyright © 2021 congatec GmbH  

      SA70m01 

 

      

4/65

Electrostatic Sensitive Device 

All congatec GmbH products are electrostatic sensitive devices. They are enclosed in static shielding bags, and shipped enclosed in secondary 
packaging (protective packaging). The secondary packaging does not provide electrostatic protection. 

Do not remove the device from the static shielding bag or handle it, except at an electrostatic-free workstation. Also, do not ship or store 
electronic devices near strong electrostatic, electromagnetic, magnetic, or radioactive fields unless the device is contained within its original 
packaging. Be aware that failure to comply with these guidelines will void the congatec GmbH Limited Warranty.

Symbols

The following symbols are used in this user’s guide:

 

Warning

Warnings indicate conditions that, if not observed, can cause personal injury.

 

Caution

Cautions warn the user about how to prevent damage to hardware or loss of data.

 

Note

Notes call attention to important information that should be observed.

Copyright Notice

Copyright © 2021, congatec GmbH. All rights reserved. All text, pictures and graphics are protected by copyrights. No copying is permitted 
without written permission from congatec GmbH.

congatec GmbH has made every attempt to ensure that the information in this document is accurate yet the information contained within is 
supplied “as-is”.

Содержание 050100


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды