Conergy IPG 4000, Руководство по эксплуатации

Страница: 43 / 62

4 2 In st ru c t io n m an u al C o n e r g y IP G s t r in g in v e r t e r s e r ie s
6 In s t a lla t io n a n d c o m m is s io n in g
E
N
G
L
IS
H
4. Lay the contact socket in the Multi-Contact crimping tool.
5. Guide the end of the stripped wire through the slot of the
crimping tool and into the contact socket.
6. Turn the contact socket so that the crimping lugs are
aligned against the upper crimping jaw.
Fig. 6-9: Introducing the contact socket to the crimping tool
7. Press the crimping tool firmly together and then open it.
The contact socket is crimped to the wire. Check the
socket is firmly in place.
(1)
Stripped wire
(4)
Connector plug
(2)
Cap of the connector plug or
socket
(5)
Connector socket
(3)
Contact socket
The contact socket fits in the Diameter 4 guide of the
crimping tool.
CAUTION!
Risk of short circuit!
| Guide all the wire strands into the contact socket.
Otherwise a short circuit may occur later.