Conergy IPG 4000, Руководство по эксплуатации

Страница: 11 / 62

10 In st ru c t io n m an u all C o n e r g y IP G s t r in g in v e r t e r s e r ie s
2 S a f e t y
E
N
G
L
IS
H
2.3 Basic safety instructions
| Work on the device may only be carried out by qualified
electricians.
| Photovoltaic systems are electrical systems in which the
connected power source is always active ! Depending on
the operating status, voltage from the solar power system
may be supplied to the inverter. This must be noted in
particular when disconnecting from the mains.
| There are high DC voltages present and these may cause
arcing if a malfunction occurs or if plugs or safety devices
are improperly used.
| Cover nearby live parts.
| A second person must be present during all work on live
system parts and leads. In the event of an unforeseen
electrical accident, that person must be able to switch off
the power supply and provide aid.
| Damage due to improper transportation. When slewing and
depositing the load, electronic equipment can be damaged
by the force of impact. During transportation, electronic
equipment can be damaged by temperature fluctuations
and air humidity.
| Do not remove any safety devices and do not disable any
safety devices.
| Observe the warnings posted on the device itself.
| You must immediately renew any warning signs fitted on the
system which have become illegible. Where appropriate,
inform Conergy Service.
| If the inverter is opened, the warranty of the system is
invalidated.
| Keep a copy of this instruction manual directly at the
device.