Conel CLEAR DOS, Руководство по эксплуатации

Страница: 62 / 112

62
/ Disconnect the water supply to the dosing pump. Close the stopcock or switchover the bypass valve.
/ Protect the flange surfaces against damage! Damaged flange surfaces will no longer seal correctly. The
resulting escaping water can cause damage to the home and furnishings and equipment.
/ It must therefore be ensured that no dirt gets into the dosing pump. When the dosing pump is recom-
missioned, this dirt can come into contact with the drinking water and be released into it. The health of
persons drinking contaminated water is put at risk.
/ Store the dosing pump in a frost-free area. Frost can freeze water enclosed in the dosing pump, result-
ing in mechanical damage to the dosing pump. Escaping water can cause serious property damage in
the home.
/ Once the dosing pump is fitted and started again, it must be bled and flushed through.
Recommissioning sequence:
/
Open stopcock/bypass valve.
/ Open a tap downstream of the dosing pump. After a flushing water quantity of 5 l the dosing pump is
bled.
/ Plug the power supply unit in.
The dosing pump now automatically starts operating.
6.13
OVERVIEW OF DISPLAY MESSAGES
Pull the power supply unit out of the socket.
Indication Description Further information
Minerallösung
Behälter leer
The message appears if the empty
signalling electrodes are dry.
It goes out as soon as a new mineral
solution container has been insert-
ed and the empty signalling elec-
trodes are again immersed in the
mineral solution.
see chapter 6.7 “EXCHANGE OF THE MIN-
ERAL SOLUTION CONTAINER”
Wartung/
Service
The message appears after the an-
nual service interval has elapsed.
see chapter 9.3 “MESSAGE “MAINTE-
NANCE/SERVICE””