Conel CLEAR 2.0 KD Series, Руководство по эксплуатации

Страница: 48 / 76

48
11
TECHNICAL DATA
The following applies for all the models of the device:
/
The water to be filtered must conform to the European Drinking Water Regulations!
/ The nominal flow rates given in the table are valid for a clean filter.
11.1
ACCESSORIES
/ Clear 2.0 SAFE . Central water monitoring system for installation between built-in rotary flange and
cartridge filter with pressure reducer. For monitoring the water consumption and shutting off the wa-
ter pipe when adjustable limits are exceeded. Protects against the effects of water pipe bursts, leakag-
es, defects on the domestic water installation and unusually high water consumption. Detects leaking
taps and valves.
Technical data CLEAR 2.0 KD ¾" CLEAR 2.0 KD 1" CLEAR 2.0 KD 1¼"
Connection diameter nominal DN 20 DN 25 DN 32
Nominal flow rate to DIN EN 1567 2.3 m³/h 3.6 m³/h 5.8 m³/h
Nominal pressure PN 16 PN 16 PN 16
Operating pressure
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 16 bar
(150 - 1600 kPa)
1.5 - 16 bar
(150 - 1600 kPa)
Adjustable discharge pressure
Factory setting
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
1.5 - 6 bar
(150 - 600 kPa)
4 bar
(400 kPa)
Mesh size
lower mesh width
upper mesh width
0.1 mm (100 μ m)
0.095 mm (95 μ m)
0.125 mm (125 μ m)
0.1 mm (100 μ m)
0.095 mm (95 μ m)
0.125 mm (125 μ m)
0.1 mm (100 μ m)
0.095 mm (95 μ m)
0.125 mm (125 μ m)
Water and ambient temperature max. 30 °C (86 °F) max. 30 °C (86 °F) max. 30 °C (86 °F)
Fitting length with screw connection 180 mm 195 mm 230 mm
Fitting length w/o screw connection 100 mm 100 mm 110 mm
Threaded connection according to DIN EN 10226-1 DIN EN 10226-1 DIN EN 10226-1
Weight 3.4 kg 3.6 kg 4.1 kg