Conel CLEAR 2.0 K 1, Руководство по эксплуатации

Страница: 51 / 80

51
11
TECHNICAL DATA
The following applies for all the models of the device:
/
The water to be filtered must conform to the European Drinking Water Regulations!
/ The nominal flow rates given in the table are valid for a clean filter.
/ The nominal pressure denotes the pressure class, according to which the cartridge filter must fulfill the
requirements of the standards DIN EN 13443-1 and DIN 19628. The maximum operating pressure is
lower, in order to ensure the optimum function of the cartridge filter.
11.1
ACCESSORIES
/ Clear 2.0 SAFE . Central water monitoring system for installation between built-in rotary flange and
cartridge filter. For monitoring the water consumption and shutting off the water pipe when adjusta-
ble limits are exceeded. Protects against the effects of water pipe bursts, leakages, defects on the do-
mestic water installation and unusually high water consumption. Detects leaking taps and valves.
Technical data CLEAR 2.0 K ¾" CLEAR 2.0 K 1" CLEAR 2.0 K 1¼"
Connection diameter nominal DN 20 DN 25 DN 32
Nominal flow rate at a pressure loss
of 0,2/0,5 bar (20/50 kPa)
3.0/4.9 m³/h 3.1/5.
2
m³/h 3.3/5.4 m³/h
Nominal pressure PN 16 PN 16 PN 16
Operating pressure
1.5 - 10 bar
(150 - 1000 kPa)
1.5 - 10 bar
(150 - 1000 kPa)
1.5 - 10 bar
(150 - 1000 kPa)
Mesh size
lower mesh width
upper mesh width
0.1 mm (100 μ m)
0.095 mm (95 μ m)
0.125 mm (125 μ m)
0.1 mm (100 μ m)
0.095 mm (95 μ m)
0.125 mm (125 μ m)
0.1 mm (100 μ m)
0.095 mm (95 μ m)
0.125 mm (125 μ m)
Water and ambient temperature max. 30 °C (86 °F) max. 30 °C (86 °F) max. 30 °C (86 °F)
Fitting length with screw connection 180 mm 195 mm 230 mm
Fitting length w/o screw connection 100 mm 100 mm 110 mm
Threaded connection according to DIN EN 10226-1 DIN EN 10226-1 DIN EN 10226-1
Weight 3.2 kg 3.5 kg 3.9 kg