Conel CLEAR 2.0 K 1, Руководство по эксплуатации

Страница: 34 / 80

34
4
SAFETY
4.1
INTENDED USE
Installation and use of the cartridge filter are each subject to the applicable national regulations. In addi-
tion to the operating instructions and the obliging regulations concerning accident prevention that exist in
the country of operation and the location of use, the established technical regulations concerning safe and
professional work, should also be observed.
The water which is to be filtered should fulfil the requirements stipulated by European
drinking water directives!
It is absolutely essential that the manufacturer/supplier will be consulted prior to any operation of the de-
vice using water of a different quality, respectively with water that contains additives.
This cartridge filter is suitable for use in cold drinking water up to a maximum water and ambient temper-
ature of 30 °C (86 °F). It is produced to state of the art standards and the generally accepted safety regu-
lations in Germany.
The cartridge filter may only be used as described in the operating instructions. Any other or further use is
deemed not to be intended use.
Additional dangers exist in case of non-intended use and failure to observe the danger symbols and safety
information. The manufacturer/supplier are not liable for any losses or damage resulting from this. The risk
is solely borne by the user.
Intended use also includes observing the operating instructions.
The manufacturer/supplier must always be consulted before using the cartridge filter outside the use lim-
itations given in the operating instructions. The cartridge filters are only to be used in a technically perfect
condition, for their intended use, safely and aware of the dangers and with full observance of the instruc-
tion manual!
Have any malfunctions corrected immediately!
4.2
MATERIALS USED
The materials used are resistant to the physical, chemical, and corrosive loads to be expected in the drink-
ing water and fulfil the requirements specified in DIN EN 13443-1 and DIN 19628 (“Mechanical filters in
drinking water installations”). All materials are hygienically and physiologically safe. Plastics coming into
contact with water fulfill the official guidelines of the German Federal Environmental Agency as well as the
DVGW working sheet W 270. Metallic materials fulfill the requirements of the standard DIN 50930-6
(Impact on the drinking water quality).