34
5.6.1.1 Point-to-point
This is the most basic mode.
a PBX. It should be configured as follows:
F
IGURE
36.
P
OINT
In each case, you have to specify the IP address and number that you want to call, using the
nomenclature
<number called>@<IP address>
parameter.
In the “
Alternative SIP URL
” field you can add a
not reply or it is disconnected.
Normally the first part of the SIP URL is not used and the call rings at the terminal that has the
destination IP, even if this number has not been configured or is not the sam
dialled.
Some VoIP telephones do not work unless they have first been registered on a
cases, simply specify that in the telephone’s settings that the
will allow the telephone to be registered an
It is possible to work with numbers alone and not have to enter IP addresses for the SIP
destinations, especially when calling from the telephone.
following option:
. . .
Resolve the destination IP address using the called name
In this case, the number of the IPefono is the same as the name that has previously been
configured on the “
Main
”
screen
Call button destination SIP URL
Alternative SIP URL
UDP port
STUN server
External IP address
Proxy hostname or IP address
Proxy account name
Proxy account password
Domain name
Proxy registration time in seconds
Register only when an outgoing call is pending
Resolve the destination IP address using the called name
Configuration Guide
It consists of making calls between terminals, without any need for
It should be configured as follows:
OINT
-
TO
-
POINT CONNECTION CONFIGURATION
(V
O
IP/SIP
OPTION
)
In each case, you have to specify the IP address and number that you want to call, using the
<number called>@<IP address>
for the “
Call button destination SIP URL
” field you can add a second destination in case the first one does
not reply or it is disconnected.
Normally the first part of the SIP URL is not used and the call rings at the terminal that has the
destination IP, even if this number has not been configured or is not the sam
Some VoIP telephones do not work unless they have first been registered on a
cases, simply specify that in the telephone’s settings that the PBX is one of our intercoms, this
will allow the telephone to be registered and you will be able to operate it in point
It is possible to work with numbers alone and not have to enter IP addresses for the SIP
destinations, especially when calling from the telephone. To do this, you must activate the
Resolve the destination IP address using the called name
Yes
this case, the number of the IPefono is the same as the name that has previously been
screen
(see
Figure 25
).
Call button destination SIP URL
5060
(not used)
Proxy hostname or IP address
(not used)
(not used)
(not used)
Proxy registration time in seconds
(not used)
Register only when an outgoing call is pending
No
Resolve the destination IP address using the called name
No
5 – Configuration
Configuration Guide. IPefono. V2.8
It consists of making calls between terminals, without any need for
In each case, you have to specify the IP address and number that you want to call, using the
Call button destination SIP URL
”
second destination in case the first one does
Normally the first part of the SIP URL is not used and the call rings at the terminal that has the
destination IP, even if this number has not been configured or is not the same as the one
Some VoIP telephones do not work unless they have first been registered on a PBX. In those
is one of our intercoms, this
d you will be able to operate it in point-to-point mode.
It is possible to work with numbers alone and not have to enter IP addresses for the SIP
To do this, you must activate the
this case, the number of the IPefono is the same as the name that has previously been