
Manual de Configuración. IPefono
2.5 Startup
The IPefono leaves the factory with a pre
(
mask 255.255.255.0), so that it can be connected to the IP network
different ways:
With the PC and IPefono connected to the local
With the PC and IPefono directly connected (via the Ethernet connection).
When the connection has been established according to one of the above scenarios
5
) enter the device’s IP address in the address bar of your browser, if it has not been changed:
F
IGURE
The PC needs to have access to the device’s IP network.
where necessary.
IP address of
the IPefono
efono. V2.8
The IPefono leaves the factory with a pre-set IP address, either
192.168.22.41 or
so that it can be connected to the IP network. It can be configured
With the PC and IPefono connected to the local network (via a switch).
With the PC and IPefono directly connected (via the Ethernet connection).
When the connection has been established according to one of the above scenarios
) enter the device’s IP address in the address bar of your browser, if it has not been changed:
IGURE
6.
A
CCESSING
S
ETUP WIZARD WITH THE WEB BROWSER
The PC needs to have access to the device’s IP network. Change the PC’s IP address
where necessary.
address of
2 – Instalación
9
192.168.22.41 or 192.168.1.61
It can be configured in two
network (via a switch).
With the PC and IPefono directly connected (via the Ethernet connection).
When the connection has been established according to one of the above scenarios (see
Figure
) enter the device’s IP address in the address bar of your browser, if it has not been changed:
Change the PC’s IP address