CONDTROL XP3 PRO, Руководство пользователя

Страница: 5 / 39

User manual
LASER DISTANCE METER
8
EN
XP3 PRO CONDTROL
9
User manual
LASER DISTANCE METER EN
XP3 PRO CONDTROL
PRODUCT DESCRIPTION
1. Display
2. Keyboard
3. Switch on the device / turn
on laser beam / single distance
measurement / continuous
measurement
4. - Addition/up/increase the
value/ flip through measuring
results in memory (forward)
5. Subtraction/down/decrease
the value/ flip through measuring
results in memory (backwards)
6. Timer/measuring unit
7. Calculation of area/wall
area/volume/ point-to-point
measurement
8. Calculations by tilt sensor and
Pythagoras’ Theorem /stake-out
9. Bluetooth/reference point
10. Memory/switch on/off the
sound signal
11. Switch off the device /clear /
exit mode
12. Strap location
13. End-piece
14. Mini-USB connector for
charging
1
2
3
4
8
10
5
7
9
14
12
11 13 6
Display
1. Main line
2. Additional lines
3. Indication of tilt angle
4. Indication of the mode
5. Indication of battery
charge level
6. Measuring unit
7. Reference point
2
7
6
1
3
OPERATION
Insert/replace batteries
Insert batteries observing correct polarity. Use nickel-metal-hydride batteries.
Charge level is shown on display. Charge batteries when symbol appears
on the display. Use USB charger delivered in the set only.
Don’t use the product while charging.
It takes approximately 4 hours to fully charge the batteries.
Switch on/off
Switch on: press .
Switch off: press and hold for 1 sec.
Measuring unit
To select the appropriate measuring unit press and hold for 2 sec.
required number of times.
Sound signal
To switch on/off sound signal press and hold for 2 sec.
4
5