CONDTROL XP3 PRO, Руководство пользователя

Страница: 7 / 39

User manual
LASER DISTANCE METER
12
EN
XP3 PRO CONDTROL
13
User manual
LASER DISTANCE METER EN
XP3 PRO CONDTROL
Press
Second measurement.
– first measurement
– second measurement
– result of addition/subtraction of 2
measurements
To do addition/subtraction of more than 2 measurements press and
perform the above mentioned operations required number of times.
Press Exit the mode.
CALCULATIONS
Area
Press
Activate function of area calculation. Symbol
appears on the display. Laser beam is on.
Press First measurement (length).
Press Second measurement (width).
– length
– width
– area
If sound signal is on, when approaching the stake-
out point the product emits sound signal. When
reaching the stake-out point symbol appears
on the display and sound signal tonality is changed.
– distance between the object and stake-out point
of last measured distance. This value will increase
after each next measurement by the value of last
taken measurement.
– value of distance A
– value of distance В
– current distance to the next stake-out point.
Mark point А and go on moving the product
along stake-out line until you reach point B. If it
is necessary to transfer several equal distances,
repeat the last operation required number of
times.
Press Stop the measurement
* If press and hold or the speed is increased.
Addition/Subtraction
Press
Switch on the laser beam. Aim the product at the
object of measurement.
Press
First measurement.
Measuring result appears in the main line.
Press or Activate addition or subtraction .
Press
Switch on the laser beam. First measuring result
moves to the line 2 on the display.