CONDTROL XP3 PRO, Руководство пользователя

Страница: 8 / 39

User manual
LASER DISTANCE METER
14
EN
XP3 PRO CONDTROL
15
User manual
LASER DISTANCE METER EN
XP3 PRO CONDTROL
Wall area
Press
2 times
Activate function of wall area calculation.
Symbol appears on the display.
Laser beam is on.
Press First measurement (height).
Press Second measurement (length 1).
Press Third measurement (length 2).
– height
– length 1
– length 2
– wall area
Press
3rd, 4th, 5th etc. measurements can be done
unlimited number of times. Each new wall surface
is added to previously calculated wall area result.
Volume
Press
3 times
Activate function of volume calculation.
Symbol appears on the display.
Laser beam is on.
Press First measurement (length).
Press Second measurement (width).
Press Third measurement (height).
– length
– width
– height
– volume
Point-to-point measurement
Long press
for 1 sec.
Symbol appears on the display.
Laser beam is on. Line is flashing.
Press First measurement (distance to point 1)
Press Second measurement (distance to point 2)
– distance to point 1 (measured)
– distance to point 2 (measured)
– distance between points 1 and 2 (calculated)
Note: Make sure that the starting point of the
measurement (for example, the bottom end of the
device) is the same in both measurements.