5
1.
General Safety Instructions
1.1
Explanation of symbols and instructions
These operating instructions contain important specifications on the safe operation of the system.
These operating instructions, particularly the section on safety instructions, must be observed by all
those who carry out work on the system. This applies to the installation company as well as the system
operator. In addition, the special rules and regulations for accident prevention that apply to the usage
location must be observed.
The following symbols are used to indicate personal hazards and guidance on the proper handling of
the system in these operating instructions:
1.2
Operator’s obligation
The operator undertakes to ensure that all those working on the system
are familiar with the basic health and safety and accident prevention regulations and have been
instructed in the handling of the system,
have read and understood the safety section and the warnings in these operating instructions and
have confirmed this by their signature, and
have their safety-conscious work checked at regular intervals.
DANGER!
This symbol indicates an imminent threat to personal health which may be fatal. Failure to observe
these instructions may result in serious health hazards or even life-threatening injuries.
WARNING!
This symbol indicates a potential threat to personal health which may be fatal. Failure to observe
these instructions may result in serious health hazards or even life-threatening injuries.
CAUTION!
This symbol indicates a potentially dangerous situation. Failure to observe these instructions may
result in minor injuries or property damage.
INSTRUCTION
This symbol provides important information on the proper handling of the system. Failure to observe
these instructions may result in faults on the system or in the vicinity.
General safety instructions
Содержание CONDAIR SOFT
