PC-POD-CP-006-v01
PC-POD-CP-006-v01
Printed copies are not controlled.
Page
14
of
35
7.2.7
If not already done, attach cable to cuff.
7.2.8
Use the Velcro strap to secure the cable to the individual’s wrist.
7.2.9
Ask participant to sit down. Wait 5 minutes.
7.2.10
Ensure a stable heart rate is displayed on the monitor.
NOTE: A stable heart rate must be displayed on the monitor for Tango+ to be able to
obtain an accurate reading.
7.3
Software Setup
7.3.1
Creating a New Participant
7.3.1.1
Click on “COPWINHRV” on desktop to open software.
7.3.1.2
Select “File”, “New Patient”, “New Patient - First Data” to create a new
participant file.
7.3.1.3
Select the desired project folder in the dialog box.
7.3.1.4
Enter participant’s ID and date in “File Name:” box and click “Save”.
NOTE: It is recommended that a project folder be created for each participant.
7.3.1.5
Select “Yes” in the “Patient Folder Creation Option!” window.
7.3.1.6
Enter subject’s general information in the top half of the “Patient
Information Form” window.
NOTE: “Birth Date” is written as month, day, and year (e.g., Sept 16 1983).
7.3.1.7
In the bottom half of the window, more specifically, in the “Posture” box,
select “#1” and assign a posture label (e.g., seated, standing, or reclining).
In the red boxes below, enter the electrode distance in centimeters
previously noted. Repeat for posture “#2” and “#3”, if multiple postures
are desired.
7.3.1.8
Click “Save Changes”.
7.3.2
Open an Existing Participant
7.3.2.1
Click on “COPWINHRV” on desktop to open software.
7.3.2.2
Select “File”, “New Patient”, “Previous Patient- New data” to open an
existing participant.
7.3.2.3
Select the desired project folder in the dialog box.
7.3.2.4
Select the patient folder which had previously been created for the
participant.
