Conceptronic CIPCAM720OD, Руководство пользователя

Страница: 9 / 27

8
set.
4) Snap /record / SD card/playback

Click “Snap” button, to save the picture to the specified file.

Click “Record” button to start record. Click again to stop record.

Click “Check TF/SD card” can browse the files in the SD card (If the SD card
already inside the camera), you can select file to download it;

C
lick “Playback” button, it will show a player which can play the record video.
For these buttons means: play; stop; open video file; slow
play; quick play.
2.3. View video by WiFi connection in LAN
After finishing the wired connection as chapter 2.2, you can connect the camera by WiFi.
Login camera in wired connection and enter wifi setting, and then operate as the
following step, example of figure 5.
Figure 5
Select ‘On’ and click ‘Search’, and then select wireless router in pop up menu, click ‘OK’
and
enter its password, click ‘apply’ to save the wireless settings. And you can click
‘check’ to check if the wireless setting is successful. After setting successfully,
please pull
out network cable and reboot the camera to use the wireless connection to view video .
Because the camera supports WPS/QSS, so you can set wireless by simple way as
below.
1) Please confirm if the router connected to camera supports WPS/QSS (you can check
user manual of the router or get the support from router factory);
2) Press WPS/QSS button on the router, it will launch the function.
3) Press and hold on reset button for 2~5 seconds after it ran normally
（
not need
connect cable
）
, it will launch the WPS/QSS function, then match the setting with the
router, the status LED always on when it was matching, and it will flash after
matching successfully.
4) Unplug power adaptor and reboot the camera, then you can use the wireless
connect function.