Concept2 Smoke Screen SANIHAZE, Руководство пользователя

Страница: 7 / 8

CALCULATING THE AMOUNT OF ACTIVATIONS REQUIRED
The generator creates a sufficient concentration of fog at a rate of 20m3/minute.
To calculate the volume of the area that you are interested in sanitising, multiply the length, width and height of
the area. This will give you the volume in m3.
Divide the volume by 20 and this will tell you the number of minutes that one generator will need to produce fog
for.
Example:
100m3 area requires a 5 minute activation of one generator or 2.5 minute activation of 2 generators.
RECOMMENDED LENGTH OF TIME FOR SANITISING.
It is recommended that the fog is allowed to persist in the area for a minimum of 10 minutes before the area is
ventilated.
NOTES
:
It is normal for a small amount of condensation to build up at the nozzle. When the generator is cool, simply wipe
this down with a clean cloth.
It is normal for the generator to emit a small amount of fog from time to time when it is in standby. This can also
occur after the generator has been down powered and is cooling down.
If the generator is operated for an extended period of fog production, eventually it will go under the ready tem-
perature and will need to pause in order to reheat – this is done automatically. The red LED on the handle will
flash during this period and will return to solid once the generator has reached its operational temperature.
If the generator runs out of sufficient fluid, it will automatically stop until it is re-filled.
CLEANING AND STORING YOUR SANIHAZE GENERATOR
Do not allow the fluid reservoir or container to become contaminated with impurities. Immediately replace the
caps once filling has been completed.
When cool, the exterior of the generator may be wiped with a clean damp (but not wet) cloth.
Before storing the fog generator, empty the reservoir of fluid and replace with distilled water. Run a 2 minute
cycle with distilled water to avoid any blockages occurring while the generator is in storage.
It is recommended to power up the generator and run a distilled water cycle at least once a month if it is not
being used.
Excessive dust or liquid residue on the generator will reduce it’s performance and cause poor heat dissipation
so it’s important to keep the case clean..