Concept2 Smoke Screen SANIHAZE, Руководство пользователя

Страница: 4 / 8

SETUP
• Unpack and carefully remove all packing gaskets. Pay particular attention to ensure the nozzle does not
have any packing surrounding it.
• Place the generator on a flat surface with at least 50cm of space around the machine.
• To fill the reservoir, remove the lid and add Concept Smoke Screen approved fluid until the reservoir is 80%
full.
• Replace the lid.
• Do not use unapproved fluid. Doing so may damage the machine and/or result in the production of toxic
substances.
OPERATION
Do not overfill the reservoir and remember to re-tighten the cap.
Once the generator has been filled, power it up by connecting to a mains socket and operating the power
switch on the back. Before powering, confirm that the mains supply matches the voltage specification on the
technical notice located on the back of the generator.
Power switch
Fluid level indicator
Mains cable
Wireless
receiver
Fluid tank
INDEX OF TERMS
• Fluid tank - unscrew the lid to refill with fluid
• Fluid level indicator - check the fluid levels
• Power switch - turn the machine on/off
• Mains cable - plugs into a wall socket to give the machine power
• Wireless receiver - allows the machine to be activated remotely usin the wireless transmitter