Concept2 Smoke Screen SANIHAZE, Руководство пользователя

Страница: 6 / 8

ENROLLING ADDITIONAL TRANSMITTERS
The transmitter supplied with the generator has been pre-enrolled at the factory and does not require pairing.
The receiver is capable or enrolling up to 5 additional transmitters. Transmitters may also be enrolled to
multiple generators (enabling one transmitter to trigger several generators simultaneously)
When the generator is first powered on, the green LED located near the receiver will flash for 15 seconds
indicating the enrolment period.
During this period, operate button A on the transmitter you wish to enrol.
Successful pairing is indicated by the LED changing to a solid green before the 15 second period has ended.
CREATING FOG
Before creating fog, it is recommended that the area is cleaned as per your standard cleaning schedule. The
fog is able to sanitise in difficult to reach areas, but pre-cleaning is an important step and the fog is intended to
supplement this, not replace it.
There are 2 methods for creating fog once the generator has reached operational temperature.
Wireless transmitter
Pressing button B will activate the generator and button
A will stop it. N.B. if button B was used when enrolling
the transmitter this button will both start and stop the
generator.
Button on handle
Pressing the button on the handle will trigger the
generator for a pre-configured 5-minute activation.
This can be interrupted by pressing the button again
or using the wireless remote to stop the activation.
The fog produced is safe to breath, however it is
recommended to operate the generator remotely and
leave the area to avoid any possible allergic reaction
to the sanitising fog.