EN
43
MTV3017
Installation
1. Remove tray and wheel.
2. Turn the unit on the side or back, and using a screwdriver replace the feet with high ones (Fig. 2).
3. Screw the brace bolt A into the upper cover.
4. Mount the frame and fix it using 4 assembly screws (B) - see arrows on Fig. 3).
5. Put the complete set on the edge of the built-in box, and unscrew the brace bolt against upper plate of the box
to make about a 1 mm gap.
6. Place the supply cable as necessary in the box to prevent jamming or breaking.
7. Shift the complete set in the box. Open the door, and fix the set against moving out by screwing the safety screw
© in the hole on the lower side of the frame (Fig. 4). Cover the screw (E).
Fig. 2
Fig. 4
Fig. 3
