EN
37
MTV3017
1
4
5
3
6
9
2
8
7
OPERATING INSTRUCTIONS
Installation
1. Remove all the packaging and marketing materials from the unit before the first use. Do not remove the plastic foil
on the inner side of the door.
2. Check the appliance and power cord for damage regularly. Do not switch on a damaged unit. There can be none
of the following: door askew or damaged, door sealing damaged, broken or damaged hinges or damaged safety
closing system.
3. Place the unit only on a stable and heat-resistant surface, out of reach of other heat sources. This surface shall have
sufficient load capacity to hold the unit with its contents.
4. Follow the installation instructions for the unit. Make sure there is a safe distance between the unit and flammable
materials, such as furniture, curtains, lace, blankets, paper, clothing etc.!
5. Do not switch the unit on without a properly mounted rolling wheel and rotating glass tray.
6. The supply cable plug has to be easily accessible so that it can be disconnected quickly, if need be.
NOTE
Prior to using a new unit, wipe the surface and the inside with a wet cloth for hygienic reasons. Wash all the removable
parts in warm water with detergent.
WARNING!
Open the door slowly and carefully. When opening the door during operation, or after preparation, a large volume of
steam is released, and condensed hot water may drip from the lower door edge. There is a risk of scalding.
Microwave oven cooking principles
Place the food evenly. Place thicker sections at the edges.
Watch the heating time. Heat for the shortest of the prescribed times, and if necessary, make it longer. Overheated
food can ignite.
DESCRIPTION OF THE CONTROL PANEL
1. Display
2. Cooking type button (MICROWAVE/GRILL/COMBI)
3. Defrost button by weight (WEIGHT DEFROST)
4. Defrost button by time (TIME DEFROST)
5. Delayed start and clock setting button
(CLOCK/PRE-SET)
6. Preset program selection button (AUTO MENU)
7. Time, weight and power settings button
(TIMER/POWER/WEIGHT)
8. ON and confirmation button
(QUICK START/START)
9. OFF and reset button (CANCEL/STOP)
