EN
42
MTV3017
ASSEMBLY AND INSTALLATION
The unit is designed to be in-built in kitchen set.
The supply cable shall be accessible after the installation!
List of parts
A
Brace bolt
1 piece
B
Assembly screws
4 pieces
C
End piece safety screw
1 piece
D
Safety screw cover
1 piece
E
Long feet
4 pieces
Dimensions of the box
For the dimensions for
installation of the unit see
Fig. 1a (upper box) and
Fig. 1b (lower box).
Fig. 1a
Fig. 1b
WARNING!
Install the unit at a maximum height of 85 cm.
The in-built box should not have a back side, for cooling and ventilation purposes.
Keep the minimum dimension of the ventilation hole in the back upper part in the whole width. If there is another
box placed above the unit, the ventilation should be arranged for this as well. A so-called ventilation chimney will be
created.
filled with water, and leaving the bowl for 5 minutes in the oven while operating. Dry the inside with a soft cloth
afterwards.
If you need to replace the inner light bulb, contact the distributor.
If you do not keep the unit clean, the surfaces can be damaged, which may lead to a shorter service life and dangerous
situations.
